refine these listings
Shell & Tube Heat Exchangers
Shell and tube heat exchangers are the most common type of heat exchanger and are used in the chemical, oil, petrochemical and various other industries. Shell and tube heat exchangers consist of a series of tubes. One set of these tubes contains the fluid that must be either heated or cooled. The second fluid runs over the tubes that are being heated or cooled so that it can either provide the heat or absorb the heat required. A set of tubes is called the tube bundle and can be made up of several types of tubes: plain, longitudinally finned, etc. Shell and Tube heat exchangers are typically used for high pressure applications.
95m2 Shell & Tube Heat Exchanger
Used 95m2 Shell & Tube Horizontal Heat Exchanger, manu by Charles Thompson Ltd, 1997, mild steel shell construction, hastelloy C-276 tubes & tube plates, 444 tubes, design pressure 10 bar/ FV both sides, design temp 200degC, 4350mm overall length of unit, 3584mm over tubeplates, 760mm i/dia.
80m2 Hastelloy Shell & Tube Heat Exchangers
Used 80m² Hastelloy C-276 Horizontal Shell & Tube Heat Exchangers, manu by Portobello Fabrications Ltd, 1998, mild steel shell, hastelloy tubes, design pressure 5 bar shell, 7 bar tube, design temp 60degC both sides, 6000mm over tubesheets, 510mm i/dia, 215 tubes, 3/4" o/dia, ex chemical use.
18.4m2 Shell & Tube Heat Exchanger
Used 18.4m2 Shell & Tube Heat Exchanger, manu by Charles Thompson Ltd, 2006, Design Temp shell 50degC, Channel 150degC, design pressure shell 10bar, channel 7bar/FV, material of construction mild steel shell, 304L Stainless Steel Channel.
9m2 Shell & Tube Heat Exchanger
Unused 9.57m2 Shell & Tube Heat Exchanger, built by Graham Hart (Process Technology) Ltd, 2003, material of construction: 316L Stainless Steel, design pressure 4.14 bar/FV, design temperature: 204degC, no. of passes shell side 1, no. of passes tube side 2, 53 off 25mm tubes, tube length 3000mm long, bundle 300mm dia, expansion bellows, connections: 2 off 80mm to end cap, 1 off 150mm to...
5m2 Tantalum Shell & Tube Heat Exchangers
Used 5m2 Horizontal Tantalum Shell & Tube Heat Exchangers, manu by AstroCosmos Metallurgical Inc , 1999, material of construction: Shell Side 304L Stainless Steel, Tube Side Tantalum tubes, Tantalum clad 304L Stainless Steel (tube sheet & bonnets), Design code ASME VIII Div.1 1998 (Stamped) & Tema B, working pressure 100PSI/FV, dimensons: 200mm dia, 2438mm...
